Philips 32PFL3506H-12 - Manual (Page 33)

29
English
Start a TV demo
You can use demonstrations to better
understand the features of your TV. Some
demos are not available on certain models.
Available demos are displayed in the menu list.
1
While you watch TV, press .
2
Select [Setup] > [Watch demo], OK.
3
Select a demo and press OK to view it.
4
To exit, press .
Reset the TV to factory
settings
You can restore the default picture and sound
settings of your TV. The channel installation
settings remain the same.
1
Press .
2
Select [Setup] > [TV settings] > [Factory
settings], then press OK.
3
If you are prompted to enter a code, enter
the child-lock code (see ‘Set or change
code’ on page 23).
» A confirmation message is displayed.
4
Press OK to confirm.
Change TV preferences
Use the preferences menu to customise your
TV settings.
1
Press .
2
Select [Setup] > [TV settings] >
[Preferences].
3
Select one of the following, then press OK.
• [Menu language]: Select a menu
language.
• [Sleep timer]: Switch the TV to
standby after a pre-defined duration.
• [Location]: Optimise TV settings for
your location - home or shop.
• [E-sticker]: (For shop mode only)
Switch the e-sticker on or off.
• [Volume bar]: Display the volume bar
when you change the volume.
• [Auto switch off]: To conserve energy,
set the TV to switch to standby
automatically after a period of
inactivity.
This TV is also designed with other
energy efficiency settings. If there is
no user interaction (such as pressing
a remote control button or a control
on the front panel) for four hours,
the TV will automatically switch to
standby.
• [Channel information size]: Change
the type of information that is
displayed when you switch channels.
• [Universal access]: Enable or disable
the universal access menu.
• [Key beep]: Enable audio feedback
when you press buttons on the
remote control or TV.
• [Audio out delay]: Automatically sync
the image on your TV to the audio
from a connected home theatre.
• [TV position]: Apply the best settings
for your TV based on how it is
mounted.
• [Teletext 2.5]: Enable or disable
Teletext 2.5. (For digital TV)
• [Clock]: Display or remove the time
from the TV, and set clock options.
EN