Philips LCD TV 32PFL3506 81cm-32" digital TV with Digital Crystal Clear - Manual (Page 8)

8 EN
A17FHUH / A17FGUH_32PFL3506_F7 A
Switching audio mode
This section describes how to switch audio language in digital
mode and how to switch audio in analog mode.
DTV
1
Press SAP to display the currently selected language and
the number of available languages.
11.1
English 1/3
11.1
English 1/3
2
Press SAP repeatedly to cycle through the available audio
languages.
• Available languages differ depending on the broadcast.
[Other] is displayed when the audio language cannot be
acquired, or the acquired languages are other than English,
Spanish or French.
Note
• SAP does not control external audio devices. P
• The information display will automatically disappear in a few seconds.
TV
Press SAP to display the currently selected audio mode.
While receiving an MTS broadcast, press repeatedly to
cycle through the available audio channel.
11.1
English 1/3
11
SAP / STEREO
When all audio are available
SAP / STEREO SAP / MONO
SAP / STEREO
SAP / STEREO
SAP / STEREO
SAP / MONO
When stereo and monaural audio are available
MONO / STEREO MONO / STEREO MONO / STEREO MONO / STEREO
When SAP and monaural audio are available
MONO / STEREO MONO / STEREO SAP / MONO SAP / MONO
When only monaural audio is available
MONO
(Cannot be switched)
STEREO : Outputs stereo-audio
SAP : Outputs second audio program
MONO : Outputs mono-audio
5 Use more of your TV
Changing picture and sound settings
You must set [Home] in [Location] (refer to page 11).
Otherwise, personalized picture and sound settings will not be
memorized after the unit goes to standby mode.
Changing picture settings
1
Press MENU on the remote control.
2
Press OK to enter the [Picture].
Picture
Sound
Setup
Features
Language
USB
Settings assistant
Personal
30
60
36
0
0
Normal
On
Auto Picture
Brightness
Contrast
Color
Tint
Sharpness
Color Temperature
Noise Reduction
3
Press Î or ï to select one of the picture settings, and
press OK to enter the setting.
4
Adjust the picture quality.
[Auto Picture]
Press
Î or ï to select the desired setting, then press OK.
([Personal], [Standard], [Sports], [Movie] and [Game])
[Brightness], [Contrast], [Color], [Tint], [Sharpness],
[Color Temperature]
Press
Î or ï to select the desired setting, then Press Í
or Æ to adjust.
[Noise Reduction]
Reduces the noise of the picture.
Press
Î or ï to select the desired option, then press OK.
On Reduces noise in an image.
Off Sets noise reduction to off.
Note
• This function is disabled when PC input is selected. (Setting will be in gray.)
5
Press MENU to exit.
Note
• To cancel picture adjustment, press MENU.
LC9__46_40PFL3706+++32PFL3506_EN.indd 8 LC9__46_40PFL3706+++32PFL3506_EN.indd 8 2011/05/30 11:44:52 2011/05/30 11:44:52