Philips LCD TV 32PFL3506 81cm-32" digital TV with Digital Crystal Clear - Manual (Page 11)

11 EN
English
A17FHUH / A17FGUH_32PFL3506_F7
TV
Selecting caption services
1
Select a caption service for analog channels:
• Press MENU on the remote control and select
[Features] > [Closed Caption] > [Caption Service].
• Press Î or ï to select one of the listed caption
services, and press OK to confi rm your choice.
2
Press MENU to exit.
Note
• Not all caption services are used by a TV channel during the transmission of a
closed caption program.
Summary of caption services
Service Description
CC-1 and T-1; are the primary caption and text services.
The captioning or text is displayed in the same
language as the program’s dialogue
(up to 4 lines of script on the TV screen,
where it does not obstruct relevant parts of
the picture).
CC-3 and T-3; serve as the preferred data channels.
The captioning or text is often a secondary
language.
CC-2, CC-4, T-2
and T-4;
are rarely available and broadcasters use them
only in special conditions, such as when
[CC-1] and [CC-3] or [T-1] and [T-3] are not
available.
• There are 3 display modes according to
programs:
Paint-on mode:
Displays input characters on the TV screen
immediately.
Pop-on mode:
Once characters are stored in memory, they
are displayed all at once.
Roll-up mode:
Displays the characters continuously by
scrolling (max. 4 lines).
ECO
You can set whether the power consumption is saved or not.
1
Press MENU on the remote control and select [Features]
> [ ECO].
Picture Closed Caption
Sound Child Lock
Setup ECO On
Features EasyLink
Location
Current Software Info
Home Language
USB
2
Press Î or ï to select the desired mode, then press OK.
On Select if you want to reduce power consumption.
Off Sets the backlight brighter.
3
Press MENU to exit.
Set your location to home
You can set the location of your TV to Y Y [Home] or [Retail].
Choosing [Home] gives you full fl exibility to change predefi ned
settings for picture and sound.
1
Press MENU on the remote control and select [Features]
> [Location].
2
Select [Home] and press OK to confi rm your choice.
3
Press MENU to exit.
Note
• You must set [Home]. Otherwise, personalized picture and sound settings will
not be memorized after the unit goes to standby mode.
Viewing photos and watching videos
on a USB storage device
Your TV is fi tted with a USB connection that enables you to
view photos or watch Motion JPEG fi les stored on a USB
storage device.
Supported formats Not-supported formats
JPEG Progressive JPEG fi les
FAT / DOS-formatted
memory devices
File names containing a dot character
It is recommended that fi les to be played back in this unit
are recorded under the following specifi cations:
• Upper limit
: 24Mpixel
• Size
: 320 x 240 (QVGA)
• Frame rate : 30fps
• Audio type : LPCM - Sampling frequency
- (32 kHz, 44.1 kHz or 48 kHz)
- Quantization bit rate (16 bit)
Note
• Philips can not be held responsible if your USB storage device is not
supported, nor will Philips accept any liability for damage or loss of stored data.
• The USB storage device is not supplied with the TV.
• Motion JPEG fi le with an extension of “.avi” can only be recognized. An
extension of “.mov” is not supported.
• This unit doesn’t support “pause”, “forward” or “reverse” during video
(Motion JPEG) playback.
LC9__46_40PFL3706++32PFL3506++19PFL3505D_EN.indd 11 LC9__46_40PFL3706++32PFL3506++19PFL3505D_EN.indd 11 2011/11/22 13:58:44 2011/11/22 13:58:44