Philips BDH4223V-27B - Manual (Page 43)

User Manual BDH4222V/4223V
39
8.6 SOUND ADJUSTMENTS
Sound Adjustments Using OSD
Sound adjustments are available to enhance the sound performance of
the monitor. These adjustments will affect the monitor’s built-in
speakers and the AUDIO OUTPUT jacks when set to “Variable”.
To access sound adjustments:
1 Press the MENU +/- keys on the remote or the front control panel.
2 Use the ADJ +/- keys to navigate to “SOUND” OSD sub-menu.
3 Use the MENU +/- keys to select the various options described in
this section.
Sound Adjustment options:
■ BASS
Adjusts the BASS level of the sound. For more bass response,
increase the BASS level.
■ TREBLE
Adjusts the TREBLE level of the sound. For more vocal and high
frequency response, increase the TREBLE level.
■ BALANCE
Adjusts the BALANCE level between LEFT and RIGHT channels.
A value of 50 is the center point between LEFT and RIGHT.
To shift the sound towards the RIGHT, increase the value up to 100.
To shift the sound towards the LEFT, reduce the value down to 1.
■ SRS® Surround Sound and BBE® Sound Maximizer
circuitry
Use SRS Surround Sound to simulate a surround sound effect if you
are not using a multi-channel sound setup.
Use the BBE Sound Maximizer when using the monitor to playback
live performance related audio programs.
Note:
When BBE is switched ON, then the BASS and TREBLE levels are set to
a default Auto-level.
Switching OFF Built-In Speakers
This monitor is equipped with built-in speakers. You can switch the
internal speakers ON or OFF using the OSD. Because these speakers
are general purpose, you may consider switching them OFF during hi-
fidelity playback of movies or other content.
■ INNER SPEAKER ON/OFF
Set to ON or OFF to turn the monitor’s internal speakers on or off.
This setting will not affect AUDIO OUTPUT jacks.
■ BASS EXTENSION
Bass extension extends the level of BASS output by the monitor.
This function is automatically set to OFF if the internal speakers are
turned ON to protect the internal speaker from damage. This
function will affect the BASS performance only through AUDIO
OUTPUT jacks and when the AUDIO OUTPUT setting is set to
VARIABLE.