Philips BDH4223V-27B - Manual (Page 26)

User Manual BDH4222V/BDH4223V
22
6.4 EXTERNAL AUDIO CONNECTION
Connecting External Amplified Speakers
This monitor can be connected to an external set of amplified speakers
using the AUDIO OUT jacks located on the back of the monitor. In
addition, this monitor is equipped with a small 3.5 mm phono style plug
for remote turn-on applications that will automatically send a remote
turn-on/off signal to the external amplified speakers.
1 Connect the red (R) and white (L) AUDIO OUT jacks to the
external amplified speaker.
2 As an option, you may use the remote turn-on plug.
Please note that not all external amplifiers can accept remote-turn
on signals.
Connecting to an External Amplifier
This monitor can be connected to an external amplifier using the
AUDIO OUT jacks located on the back of the monitor. In addition, this
monitor is equipped with a small 3.5 mm phono style plug for remote
turn-on applications that will automatically send a remote turnon/off
signal to the external amplifier.
1 Connect the red (R) and white (L) AUDIO OUT jacks to the
external amplifier or receiver.
2 As an option, you may use the remote turn-on plug.
Please note that not all external amplifiers can accept remote-turn
on signals.
Using the Subwoofer Out (Connecting a Subwoofer)
This monitor is equipped with a subwoofer output for connection of an
external amplified subwoofer.
1 Connect an RCA cable to the external subwoofer.
Notes:
● The AUDIO OUT RCA jacks can be set to either Fixed or Variable
audio output levels. Please see page 38 for additional explanation of
this feature.
● The RCA subwoofer outputs frequencies below 120Hz.
The subwoofer will use the same Fixed or Variable audio output
setting as AUDIO OUT RCA jacks.
● The 3.5mm phono/earphone output level is always used for remote
turn on/off applications.