Philips DVD580MT99 - Manual (Page 39)

Angle Mark 39
When a DVD has scenes recorded from different angles, the Angle Mark
will appear on the TV screen during a multi-angle scene. You can choose
whether or not you want the Angle Mark to be visible by turning ANGLE
MARK ON or OFF as described below.
1 Press SYSTEM MENU.
2
GENERAL SETUP will be selected. Press OK.
3 Press 9 to select ANGLE MARK, then press :.
4 Press 8 or 9 to select ON or OFF, then press OK.
If you set ANGLE MARK to ON, the Angle Mark will appear during
playback of a scene that has been recorded from different angles.
Press ANGLE }
} on the remote to watch the scene from a different
viewpoint. Details are on page 23.
Set ANGLE MARK to OFF if you do not want the Angle Mark to
appear on the TV during scenes that have multiple angles available.
5 Press SYSTEM MENU to remove the menus.
TURN ANGLE MARK ON
--- GENERAL PAGE ---
TV DISPLAY
PIC MODE
ANGLE MARK ON
OSD LANG OFF
SCR SAVER
MAIN PAGE
1,5
2-4
3/5
Angle Mark example
Current Angle 3 of total 5 available