Philips InfraPhil Infrarotlampe - Manual (Page 10)

troubleshooting
This chapter summarises the most common problems you could encounter with the appliance. If
you are unable to solve the problem with the information below, contact the Consumer Care
Centre in your country.
Problem Possible cause Solution
The appliance
doesn’t work.
The plug is not
inserted into the wall
socket properly.
Put the plug in the wall socket properly.
There is a power
failure.
Connect another appliance to check if the power
supply works.
The lamp is defective. Replace the lamp (see chapter ‘Replacement’).
The mains cord is
damaged.
If the mains cord is damaged, you must have it
replaced by Philips, a service centre authorised by
Philips or similarly qualified persons in order to avoid
a hazard.
EnglisH 10