BUSH 1080P - Manual (Page 26)

BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105 P.25
04 Using the features
your device has several disks.
Press
E
button to select Format and press to
enter. Press button to select the size you want
to format. Press OK button to format the USB Disk.
Note
The system will format the whole device and if your O
device size is bigger than 1GB, you can set the size
which is used for time shift.
Format may take several minutes and the time is
F
depending on the memory size. Press button
to select the Time Shift Disk Size. The max device size
for Time Shift is 8GB. Then, press OK button to save.
Note
If you select all the size format for time shift, you O
can not do any recording.
Waiting for the system checking. And you can see
G
the speed data after the success checking.
Note
Only have to format when you use the device for O
record for the first time.
The minimum device size for record is 1GB. Provide O
device formatting function is up to 2TB. The max
Multi-Partition is 16 partitions and one is active at
a time.
Bit rate: O
Device bit-rate>4.5MB/s REC is safe at HD t
stream
Device bit-rate>1.5MB/s REC is safe at SD
t
stream
Device bit
t -rate<600KB/s REC is bad for REC
The system can not work normally if the USB O
device have the listing problem below:
The device has bug. t
The device has error block. t
The device reports the unfaithful size. t
IMPORTANT
USB device should be format as FAT32 format by t
your PC before insert to the USB connector.
TIME SHIFT
Time Shift function is only available in DTV mode. Press
PLAY/PAUSE to pause the program, and press PLAY/
PAUSE again, the time shift program will be played. If
you want to stop time shift function, press the STOP
button.
You can stop the time shift program being played by
pressing the EXIT button.
RECORDING
Press
A
D.MENU button to record the program being
played, and press D.MENU or EXIT button to make
the recording interface minimum.