BT 4100 - Manual (Page 71)

71
Synergy 4100 – Issue 3 – Edition 1 – 21.08.06 – 7771
If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]
No display
• The batteries may be flat, dead or incorrectly inserted.
• Recharge or replace the batteries.
icon flashes
• Is the handset registered correctly to the base, see page 65.
• Check that the mains power is correctly connected.
• Check that the handset is within range of the base.
icon flashes
• The batteries are low, place the handset on the base/charger to recharge.
icon not scrolling
• Try cleaning the charging contacts.
• Check that the mains power is correctly connected.
You hear the busy tone when you press
• Make sure the handset is in range of the base.
• Another handset registered to your BT Synergy 4100 base may be on the line.
No Caller Display number/name displayed
• Have you subscribed to a Caller Display service from your network provider, see page 40.
• The caller may have withheld their number.
• An exact name/number match was not found in your phonebook. Check that you have
stored the full STD dialling code.
Help