BT 4100 User Manual

Page 28

Synergy 4100 – Issue 3 – Edition 1 – 21.08.06 – 7771

If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]

Access code

1. Select option.

2. Use or to

select

Access code

and press

and

Off

are displayed as options. Either, select

activate prefix dialling.

Code:

is displayed. Enter the

prefix you require, e.g. 9 and select

. You will hear a

confirmation beep and the display will return to the
phonebook menu. Or, select

Off

to deactivate prefix

dialling. The display will return to the phonebook menu.

Change the SIM Code

1. Select

option. The phonebook entry you used last

is displayed.

2. Select

Opt

then use

to display

SIM Code

and select

3. Use

to select either

Country Code

National

Code

International Code

and select

4. Using the keypad, enter the dialling code and select

Save

. You hear a confirmation beep.

5. Press and hold

to exit and return to standby.

Menu

Using the phone

SIM Country Code

These settings control the
conversion of numbers from mobile
format which may include +44 and
may have the 0 removed from the
area code. You should not normally
need to alter these settings if you
are using your BT Synergy 4100 in
the UK and your mobile to call UK
numbers. If this is not the case,
then please call the BT Synergy
4100 Helpline for assistance on
0870 605 8047.

If your BT Synergy 4100 is
connected to a switchboard, you
may need to enter an access code
in the dialling sequence to be able
to connect to the outside line.

The access code will not be used
when you dial the number yourself
(rather than for example from the
phonebook) to allow you to make
calls to other switchboard
extensions.