BT 4100 User Manual

Page 26

Problems copying numbers

If you try to copy a phonebook
entry to another handset and the
other handset is switched off, out
of range, or the number of the
handset you have entered is
unavailable, you will hear the
error tone.

If you try to copy the entire
phonebook to another handset and
the other handset is switched off,
out of range, or the number of
the handset you have entered is
unavailable,

Copy Phonebook Fail

will be displayed.

Stored ringer melodies you have
assigned to phonebook entries are
specific to the BT Synergy 4100
and will therefore not be copied to
another type of handset.

5. At the receiving handset the display shows

Replace

Phonebook?

select

to confirm.

The display then shows

Copying From Handset X

. Each

entry will then be copied in turn.

6. At the original handset a beep will confirm when all entries

have been copied.

Press and hold

to exit and return to standby.

Copy to or from a SIM card

With the ‘SIM copy’ feature you can copy entries from
SIM Card to phonebook or from phonebook to SIM card.
So within minutes, you can have all your mobile contacts
saved onto your landline phone for quick and easy
dialling.

1. Insert the SIM card into the SIM READER slot on the side

of the base.

2. Select

option. The phonebook entry you used last is

displayed.

3. Select

Opt

then use

to to display

SIM Copy

and select

4. Use

to display either

Copy from SIM

Copy to SIM

and select

Menu

Using the phone

Synergy 4100 – Issue 3 – Edition 1 – 21.08.06 – 7771

If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]

Please note that you cannot
remove the SIM tray from the
base completely.

SIM copy/write is to and from one
handset. To transfer entries to
other handsets after SIM copy it is
best to use the copy entry or copy
phonebook command in the
phonebook menu.