BT Diverse 6150 - Manual (Page 47)

You can operate your BT Diverse 6150 answering
machine from:
the base
the handset
Remotely from any external Touchtone™ telephone.
The factory setting for the answering machine is ON.
Until you change your outgoing message, your callers
will be greeted with the pre-recorded message ‘Hello,
your call cannot be taken at the moment, so please leave
your message after the tone’.
Day, date and time
An announcement of day, date and time of recording
will be added automatically to each message and memo.
If you do not set the day and the date and time the base
display will flash
CL to remind you that it has not been
set. The date and time is also displayed on each handset.
The day, date and time are set using a handset.
Setting day, date and time using a handset
1. Press MENU . Scroll to TIME AND DATE SETTINGS and
press OK . Display shows SET DATE & TIME . Press OK .
Answering machine
If you subscribe to your network
provider’s Caller Display service, the
date and time are set automatically
when your BT Diverse 6150
receives its first call, but you will
also need to set the day using a
handset.
47
BT Diverse 6150 – Edition 3 – 02.03.05 – 6604