Bosch WVT 52458 - Manual (Page 36)

B
34
Operating Instructions
Fault Possible cause Action
Control lights do not
come on.
Close the loading door(a click sh-
ould be heard).
The programme
does not start.
Plug is loose or not inserted.
An interrupted program will be re-
sumed when power retures. If you
wish to unload the laundry, proce-
ed as in Cleaning the drain pump ,
Page 30.
A fuse has triggered. Switch on/replace the fuse.
Call Customer Service if this fault
is repeated.
Power failure.
Loading door not closed. Check whether laundry is trapped
in door.
Start button does not
pressed. Press the Start button.
Water cannot be seen in
drum.
Detergent in chamber I is
not wash away. Prewash function is
not selected. Press Prewash button
Clean the strainer
(refer to Page 31) Strainer in supply hose
clogged.
Water tap not turned on. Water does not enter the
machine or detergent is
not wash away.
Turn on water tap.
This is not a fault.
The water lies below the visible part of the drum.
Leak in the drain hose.
The thread of the supply
hose is not tight. Water is flowing out from
underneath the machine.
Clean the water drainage pipe
and/or drain hose. Fluff-producing laundry was
washed at a high temperat-
ure. The water drainage
pipe or drain hose is
blocked.
Loose debris is blocking
the pump. Washing solution is not
completely drained.
Clean the pump.
(refer to Page 30)
Tighten the thread.
Replace the drain hose.
Motor noise
Pump noise
Not a malfunction! It is normal for noises to be heard while the
motor is running.
Vibrations when
washing and spinning
Mix1 tablespoon of fabric softener
with 1/2 litre of water and pour
into chamber I of the detergent
dispenser. Foam coming out of the
detergent dispenser. To much detergent.
Reduce the amount of detergent
next time.
Not a malfunction! It is normal for noises to be heard from the
pump during the start or the final stage of draining the drum.
Transit bolts not removed.
The machine s feet were
not secured.
Follow the directions in the insta-
llation instructions (page 37)
Realign the machine using a spirit
level,see the installation instructions.
,, , , ,, , ,
,, , , ,, , ,