Bosch WVT 52458 - Manual (Page 22)

B
20
Operating Instructions
The frame of the progress bar flashes in the display field
and the following is displayed for the selected programme:
- the symbols for the programme sections, drying and
fan ,
- recommended load,
- maximum spin speed,
- drying duration,
- programme duration.
Press the Start button. The programme starts.
The almost empty progress bar is indicated in the display
field. The recommended load goes out. While the progra-
mme is running, the programme duration counts down and
the progress bar fills up with the segments. The symbols
for the run programme sections go out.
Setting the drying programme
1. Turn the tap ON.
Due to the use of the condensation principle in drying,
please keep the connected water tap open during the
drying process.
2. Turn the programme selector to the desired programme.
(See programme sheet, page 26)
,, , ,