Dimensions & specifications – Bunn EASY CLEAR H5X User Manual
Page 2
![background image](/manuals/52837/2/background.png)
BUNN
®
practices continuous product research and improvement. We reserve the right to change specifications and product design without notice. Such
revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
All dimensions shown in centimeters.
Bunn-O-Matic Corporation owns all copyrights relating to materials in this publication. Please contact BUNN to request permission to reproduce any portion of this publication.
Dimensions & Specifications
Bunn-O-Matic
®
Corporation - 1400 Stevenson Drive Springfield, Illinois 62703 • USA • +1-217-529-6601 • Fax +1-217-529-2827 • www.bunn.com
varies with application
varies with application
Model
Product # Volts Amps Tank Heater Total
Temp
Gal./Hr.
Gal./Hr. Shipping
Cord
Agency
Watts
Watts Settings
cold water
hot water
Weight
Attached
input 35˚F
input 140˚F
(1.6˚C)
(60˚C)
H5MA
12500.0056 230
16
3670
3700
200˚F
9.1 gal
25 gal.
32 lbs.
No
93.3˚C
(39.4 L)
(94.6 L)
(14.5 kg)
H5EA
12500.0062 230
16
3670
3700
204˚F
8.9 gal.
23.5 gal.
32 lbs.
No
95.5˚C
(33.7 L)
(89 L)
(14.5 kg)
H5EA
12500.0063 230
16
3670
3700 85˚/105˚F
32 lbs.
No
29.4˚C/40.6˚C
(14.5 kg)
H5XA
12500.0064 230
16
3670
3700
212˚F
8.5
20.9 gal.
32 lbs.
No
100˚C
(32.2 L)
(79.1 L)
(14.5 kg)
H5EA
12500.0067 230
17.4
3675
4000
90˚F
32 lbs.
No
32.2˚C
(14.5 kg)
Electrical: All models require 2-wires plus ground service rated 220-240V, single-phase, 50/60 Hz.
Note: Supplied strain relief on rear side of machine.
Plumbing: 20-90 psi (138-621 kPa). Machine supplied with
1
⁄
4
" OD male flare fitting.