Black & Decker F611 - Manual (Page 10)

Holding the iron in the ironing position
over a sink or basin, press and hold the
Self Clean Button down until all the
water has been released. This can be
done with one or two hands as shown
in Figures I and J. Choose the method
which is easiest for you.
Place the iron on its Heel Rest and heat
for about 2 minutes to dry out any
remaining water. Iron over an old towel.
Cool as usual.
NEED HELP?
Is the PUSH ON LIGHT on? Push in to turn iron on.
If the Light is not on, will a lamp plugged into the outlet
turn on?
Is the Temperature Selector Dial turned to a fabric
setting?
IRON WON’T HEAT?
Is the PUSH ON Light on and has the iron heated for
about 2 minutes?
Check for water by looking in the Water Windows. Is the
Adjustable Steam Dial set at
, , or ?
Adjust the Dial to Dry and back to the desired steam level.
If steaming doesn’t start, gently tap the Soleplate on the
ironing board once or twice.
IRON WON’T START
STEAMING?
10
Figure I
Figure J