Bosch 1375-01 - Manual (Page 26)

51 50
Comes complete with Accessory part number Toolholder Drive Hex. = hex
agon
Sq. = external square W
eight without
cabel (kg) Nominal current (A) Nominal power output (W) Nominal capacity Output (W) No load speed (rpm) To
rque (Nm) for hard
screwdriving application as per I
S O 53
93
Max. thread size Frequency (Hz) Volt
age (V)
Order number
I M PACT WR E NCH ES.
0 602 442 001 265 200 M 10
0 602 442 004 135 200 M 10
0 602 442 007 72 200 M 10
0 602 443 004 200 300 M 10
30 1650 170 85 0.5 1.1 1/4 HH Hex.
30 1650 170 85 1.0 1.1 1/4 HH Hex.
30 1650 170 85 1.8 1.1 1/4 HH Hex.
30 1780 265 135 1.0 1.1 1/4 HH Hex.
Handle grip with
ON/OFF and
reverse switch HSS 48
Remarks
impact wrenches for
screws from M 6 to M 30
0 602 440 001 265 200 M 12
0 602 440 004 135 200 M 12
80 1410 260 140 0.9 2.4 1/2 HH Sq. with spring pin
80 1410 260 140 1.7 2.4 1/2 HH Sq. with spring pin
Handle grip with
ON/OFF and
reverse switch HSS 55
0 602 435 001 265 200 M 22
0 602 435 004 135 200 M 22
0 602 435 008 72 200 M 22
350 800 850 580 2.2 5.6 3/4 HH Sq.
350 800 850 580 4.5 5.6 3/4 HH Sq.
350 800 850 580 8.5 5.6 3/4 HH Sq.
Palm grip with
ON/OFF and
reverse switch Auxiliary handle 1 602 025 030 HSS 75
0 602 433 101 265 200 M 16
0 602 433 104 135 200 M 16
0 602 433 107 72 200 M 16
0 602 438 004 200 300 M 16
190 1100 360 220 1.0 3.0 1/2 HH Sq. without spring pin
190 1100 360 220 2.0 3.0 1/2 HH Sq. without spring pin
190 1100 360 220 3.7 3.0 1/2 HH Sq. without spring pin
190 1100 550 340 2.0 3.0 1/2 HH Sq. without spring pin
Centre grip with
ON/OFF and
reverse switch HSS 64
0 602 439 001 265 200 M 30
0 602 439 004 135 200 M 30
0 602 439 007 72 200 M 30
1000 600 950 700 2.8 8.6 1HH Sq.
1000 600 950 700 5.5 8.6 1HH Sq.
1000 600 950 700 10.0 8.6 1HH Sq.
Two handled grip
with ON/OFF and
reverse switch HSS 77
The machines come equipped with a special 4-m-long cable without plug. Your specialist dealer can provide you with information on the complete set of quality accessories.