Bosch 1375-01 - Manual (Page 25)

Accessory part number Comes complete with Toolholding fixture Hex. = hex
agon
Remarks W
eight without
cabel (kg) Nominal current (A) Nominal power output (W) Nominal capacity Output (W) No load speed (rpm) Torque (Nm) for hard screwdriving application as per I
S O 53
93
Max. thread size Frequency (Hz) Volt
age (V)
Order number
CUT-OUT SCREWDRIVERS.
1 607 950 037 0 602 485 101 265 200 M 4
0 602 485 104 135 200 M 4
0 602 485 118 42 300 M 4
0.8–2.5 840 80 40 0.2 0.8 1/4 HH Hex.
0.8–2.5 840 80 40 0.5 0.8 1/4 HH Hex.
0.9–3.0 1260 125 65 2.4 0.8 1/4 HH Hex.
Gib-head key
for torque adjustment
Handle grip
with ON/OFF and
reverse switch HSR 44-A
with adjustable cut-out
clutch for screws from
M 4 to M 10
The machines come equipped with a special 4-m-long cable without plug.
1 607 950 037 0 602 488 101 265 200 M 6
0 602 488 104 135 200 M 6
0 602 488 107 72 200 M 6
0 602 488 104 200 300 M 6
0 602 488 118 42 300 M 6
3–6 840 170 85 0.5 1.1 1/4 HH Hex.
3–6 840 170 85 1.0 1.0 1/4 HH Hex.
3–6 840 170 85 1.8 1.0 1/4 HH Hex.
3.2–6.5 1260 265 135 1.0 1.0 1/4 HH Hex.
3.2–6.5 1260 265 135 5.0 1.0 1/4 HH Hex.
Gib-head key
for torque adjustment
Handle grip
with ON/OFF and
reverse switch HSR 48-A
1 607 950 037 0 602 486 201 265 200 M 6
0 602 486 204 135 200 M 6
0 602 486 204 200 300 M 8
3.5–12 590 260 140 0.9 2.1 1/4 HH Hex.
3.5–12 590 260 140 1.7 1.7 1/4 HH Hex.
4–13 900 400 220 1.7 1.7 1/4 HH Hex.
Gib-head key
for torque adjustment
Middle grip
with ON/OFF and
reverse switch HSR 55-A
1 607 950 037 0 602 489 001 265 200 M 8
0 602 489 004 135 200 M 8
0 602 489 007 72 200 M 8
0 602 489 004 200 300 M 8
5–17 690 400 270 1.6 2.3 1/4 HH Hex.
5–17 690 400 270 3.3 2.3 1/4 HH Hex.
5–17 690 400 270 6.1 2.3 1/4 HH Hex.
6–20 1040 600 400 3.3 2.3 1/4 HH Hex.
Gib-head key
for torque adjustment
Pistol grip
with ON/OFF and
reverse switch HSR 57-A
1 607 950 037 0 602 487 001 265 200 M 10
0 602 487 004 135 200 M 10
0 602 487 007 72 200 M 10
9–24 780 350 200 1.0 2.8 1/4 HH Hex.
9–24 780 350 200 2.0 2.8 1/4 HH Hex.
9–24 780 350 200 3.0 2.8 1/4 HH Hex.
Gib-head key
for torque adjustment
Middle grip
with ON/OFF and
reverse switch HSR 64-A
48 49
Your specialist dealer can provide you with information on the complete set of quality accessories.