B&B Electronics Asynchronous to Synchronous Converter 2010 - Manual (Page 3)

2010AS3297 Manual 1
B&B Electronics -- PO Box 1040 -- Ottawa, IL 61350
PH (815) 433-5100 -- FAX (815) 434-7094
1.0 WARRANTY INFORMATION
B&B Electronics warrants all Model 2010 components to be free from
defects, and will—at our option—repair or replace the product should it fail
within one year from the first date of shipment.
This warranty is limited to defects in workmanship or materials, and
does not cover customer damage, abuse or unauthorized modification. If
this product fails or does not perform as warranted, your sole recourse shall
be repair or replacement as described above. Under no condition shall B&B
Electronics be liable for any damages incurred by the use of this product.
These damages include, but are not limited to, the following: lost profits,
lost savings and incidental or consequential damages arising from the use
of or inability to use this product. B&B Electronics specifically disclaims all
other warranties, expressed or implied, and the installation or use of this
product shall be deemed as user’s acceptance of these terms.
1.1 RADIO AND TV INTERFERENCE
The Model 2010 generates and uses radio frequency energy, and if not
installed and used properly—that is, in strict accordance with the
manufacturer's instructions—may cause interference to radio and television
reception. The Model 2010 has been tested and found to comply with the
limits for a Class A computing device in accordance with the specifications
in Subpart J of Part 15 of FCC rules, which are designed to provide
reasonable protection from such interference in a commercial installation.
However, there is no guarantee that interference will not occur in a
particular installation. If the Model 2010 does cause interference to radio or
television reception, which can be determined by disconnecting the RS-232
interface, the user is encouraged to try to correct the interference by one or
more of the following measures: moving the computing equipment away
from the receiver, reorienting the receiving antenna and/or plugging the
receiving equipment into a different AC outlet (such that the computing
equipment and receiver are on different branches).
1.2 SERVICE
All warranty and non-warranty repairs must be returned freight prepaid
and insured to B&B Electronics. All returns must have a Return Materials
Authorization number on the outside of the shipping container. This number
may be obtained from B&B Electronics Customer Service at (815) 433-
5100.
Packages received without an RMA number will not be accepted.
B&B Electronics' technical staff is available to answer any questions
that might arise concerning the installation or use of your Model 2010.
Technical Service hours: 8 AM to 5PM CST, Monday through Friday.