New Buck Corporation 81 - Manual (Page 34)

ROOM AIR BLOWER OPERATION
Your heater is equipped with a room air blower. For operation and wiring (See Figure 14).
For your convenience, your heater is equipped with a rheostat with which you are able to select
the air flow. The auto and manual switch will allow you to select the position at which
thermostat will function.
Auto-position: After heater has warmed up and Auto-Manual switch is placed in “Auto”
position and rheostat is in desired position, fan will automatically come on. When stove cools
off, fan will automatically shut-off.
Manual position: You must turn room air blower on and off.
NOTE: Plug power cord into a 115V AC outlet. Set switch to “Manual” and rheostat to
“High” position to ensure motor operates properly. Route cord to prevent damage to cord
insulation from heat and sharp objects. Keep cord out of way of traffic to prevent damage
caused by tripping, etc.
NOTE: When refueling or removing ashes turn “OFF” room air blower. Be sure to turn room
air blower back on when finished.
Figure 14
Page 32