BT 2100 - Manual (Page 20)

To use handsfree
This function lets you keep
your hands free, for example,
to take notes, It also enables
others in the same room to
hear and join in the call.
Note: This function is only
available if you have a
Synergy 2150 base station.
When making your call the
L
is displayed on the handset.
This has then established
your call.
Press and hold for 1 second.
The loudspeaker symbol
will be displayed. You will
now hear your caller on the
handset speaker.
Display will show Volume
1 2 3
. The number flashing
is the current setting. Use to
adjust the level, 1 is quiet,
3 is loud.
To confirm.
To switch off :
Press and hold for 1 second.
The loudspeaker symbol
will disappear from the display.
Press to end the call.
16
You can talk to one external
call and another internal
caller at the same time on
your Synergy handset.
During a call with an external
caller:
Your caller is put on hold and
you hear a tone.
KEYPAD Enter the handset number to
which you want to transfer
the call. When the handset is
answered.
Press and hold the # button
for a few seconds until the
display clears. You can now
start your three-way
conversations.
To hold a three-way conversation
Int
Synergy 2100 - Edition 3 – 31st May ’00
Options
Del
USING ADDITIONAL HANDSET
Synergy 2100 1/6/2000 3:07 pm Page 14