BT 2100 - Manual (Page 14)

To wall mount your Synergy 2100
charger, see page 23.
Plug the power cable into the power
socket on the under side of your
Synergy 2100 charging cradle.
10
Setting up
Follow these steps to set up your Synergy 2100 handset and
charger ready for use.
Please note
The Synergy 2100 has a range of
up to 300 metres outdoors and up to
50 metres indoors. It is possible that
the range may be affected by being
near water (e.g. large ponds, lakes
and the sea) as well as large metal
objects (e.g. radiators, metal partition
walls and steel girders).
The Synergy 2100 uses a nickel metal
hydride (NiMH) battery pack supplied.
Take care to connect the battery as
shown and replace the battery cover.
1
Install the rechargeable
battery in the handset
2 Connect the power cable
Synergy 2100 - Edition 3 – 31st May ’00
Plug the adaptor into the mains power
supply and switch on. The charging
light comes on.
SETTING UP
Synergy 2100 1/6/2000 3:07 pm Page 8