Beko IDTV 28C769IDS - Manual (Page 10)

9
Switching on and off
Switch on the television by pressing the » « button on the
television set.The device switches to standby mode, and the stand-by
indicator will illuminate.
Switch the television on with any »Numeric button« or
» «, » « .
Press the » « button to switch the television to standby mode.
Completely switch the television off by pressing » « on the
television set. This saves electricity.
Selecting channels
Enter single-digit or multi-digit preset channel numbers by
pressing »1 ... 0« on the remote control.
– Channels with no stations assigned are ignored.
Press
» «, » «
to move up and down channels.
Selecting AV channel positions
Use »AV« to select AV channels directly.
Adjusting the volume
Adjust the volume with » « or » «.
Muting
Use » « to switch the sound off (mute) and to switch it on
again.
TELEVISION OPERATIONS
Basic functions
Selecting stations from lists
You can select stations from various lists (e.g. all stations, favourites).
Press »
LIST
« to open the station list. The station list »All programmes« appears.
Press » «, » « to select the station and press » « to call it up.
Picture settings
Select the desired picture setting from »USER«, »SOFT«, »NATURAL« or »RICH«
with »
SUB
«.
Swap function
Allows you to swap between the program you are watching and the last selected program. i.e.
If you were watching Program 1 and change to Program 11, press the
»
DOUB
« button to go
back to Program 1. Press it again to return to Program 11.
PR 01 PR 11 PR 01
DOUB DOUB
– You can alter the »User« picture setting, see the ”PICTURE SETTINGS” chapter
on page 19.
Sound settings
Press »
UPDATE
« to select the audio setting »USER«, »MUSIC«, »SPORTS«, »CINEMA«
or »SPEECH«.
– You can alter the »USER« audio setting – see the “EQUALIZER” chapter on page 18.
- You can switch between the station list and your favourites by pressing
Press »
EXIT
« to finish the settings.
LIST