BT 500 - Manual (Page 61)

61
Verve 500 – New Style – Edition 3 – 07.09.06 – 7706
If you experience any problems, please call the Helpline on 0870 242 6652 or email [email protected]
Send a text message
1. Press
Menu
to open the main menu.
2. Use the NAVIGATION button to highlight the icon and
select
OK
.
3.
Write
is displayed, select
OK
.
4. Use the keypad to write your message then select
OK
.
5.
Number
is displayed. Either enter the number you want to
send to manually, or select soft key to search for a
number in the phonebook, then select
OK
.
6. Use UP or DOWN to highlight either:
Send SMS
– select OK .
Message Sending …
is displayed,
followed by
Message Sent
.
Or
Save SMS
to save the message in the Drafts box for sending
at a later time.
SMS Saved!
is displayed.
Sent messages are stored in the Outbox
Your BT Verve 500’s outbox is like a redial list. It holds a copy
of the last 20 sent messages.
Each message has details of the number where the message
was sent, and the time and date of sending.
At any time, press
Back
to go back to
the previous screen, or press to
cancel and return to standby.
Text messaging
Use the soft key to delete
incorrect characters/digits.
Use
LEFT or RIGHT to move the cursor
through the text, if you want to
insert/delete text.
Press
to switch between lower
and upper case.
Refer to the character map on page
13 for the full range of characters
and punctuation.
For help with entering text, see
page 62.
You can enter a number up to 24
digits.
If sending is unsuccessful,
Failed!
will
be displayed.
In order to send and receive text
messages you must not withhold your
number. On most networks if you
normally withhold your number the
1470 prefix presents your number for
you.
A new message will replace the oldest
message in the Outbox.