Buffalo Technology WBR2-G54S - Manual (Page 43)

43
WAN Network
WAN side (Internet) param-
eters. These settings are gen-
erally not required if your ISP
is providing DHCP services. In
this case these fi elds can be
left blank if desired.
Host Name - Enter the host
name as desired.
Default Gateway - A default
gateway IP should be assigned
to the AirStation. If unknown,
leave blank. If Auto IP
as sign ment from DHCP Server is selected in the WAN Port section, a gateway IP is assigned
automatically, provided the DHCP server is set to provide one.
DNS Server Address - Enter the primary and secondary DNS address(es) of the server to be used
by the AirStation for DNS resolution.
If DNS was set to Do not use, leave blank. If Auto IP as sign ment from DHCP Server was
selected, DNS addresses are assigned automatically, provided the DHCP server is set to provide
them.
Network of
WAN
Advanced Settings