Buffalo Technology WBR2-G54S - Manual (Page 32)

32
LAN Port
Set the LAN side Ethernet
settings.
LAN Side IP Address - Allows
ad min is tra tor to specify a static
IP and Subnet Mask for the
LAN side of the AirStation.
■ Note: If the AirStation’s IP
address is changed, the con-
fi guring computer’s IP must be
changed to the same range to
continue confi guration. If the
LAN IP is changed, restart the
AirStation. (Section 4.4.10). If
the IP address is changed, then the DHCP scope must be changed to match.
DHCP Server Function - Allows administrator to enable/disable the DHCP server function for the
AirStation LAN side. Select Use to enable and Do not use to disable the function. Once Use is
selected, the assigned IP address range can be specifi ed. Enter the starting LAN IP address and
total number of computers the DHCP server can accomidate.
■ Note: If there is another DHCP server on the network, one either must be disabled or the IP
range must be changed to avoid confl icts derived from overlapping DHCP scopes.
LAN Port
Settings
Advanced Settings