Behringer PMH660M/PMH880S - Manual (Page 12)

12
EUROPOWER PMH660M/PMH880S
6. SPECIFICATIONS
6. SPECIFICATIONS
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior
notice. Specifications and appearance may differ from those listed or illustrated.
PMH660M PMH880S
Type
Mic E.I.N. (20 Hz - 20 kHz)
@ 0 Ω source resistance
@ 50 Ω source resistance
@ 150 Ω source resistance
Gain
Max. input level
Impedance
Signal-to-noise ratio
Noise (THD + N)
Type
Impedance
Max. input level
Type - 1/4" TRS connectors, unbalanced
Impedance - approx. 100 kΩ, unbalanced
Max. input level - +21 dBu
Low
Mid
High
Type
Impedance
MAIN
Type
Impedance
Max. output level
MONITOR
Type
Impedance
Max. output level
Type - 1/4" TRS connectors, unbalanced
Impedance - approx. 150 Ω, unbalanced
Max. input level - +21 dBu
Type RCA, mono output RCA
Impedance approx. 1 kΩ approx. 1 kΩ
Max. input level +21 dBu +21 dBu
Noise
MAIN MIX @ -oo
Channel fader -oo
MAIN MIX @ 0 dB
Channel fader -oo
MAIN MIX @ 0 dB
Channel fader @ 0 dB
Type
Load impedance
MAIN L/R - 4 - 8 Ω
MONITOR/MAIN MONO
MAIN MONO/MAIN MONO
BRIDGE
Converter
Dynamics D/A
Sampling rate
Delay Time
Signal run time (Line In > Line Out)
Type 2-digit, 7-segment LED 2 x 2-digit, 7-segment LED
Output power @ 4 Ω 2 x 200 W 2 x 400 W
Output power @ 8 Ω (BRIDGE) 1 x 400 W 1 x 600 W
Mains voltage
Power consumption
500 W 700 W
Fuse T 5 A H 250 V T 6.3 A H 250 V
Mains connector
8.5 kg 9.4 kg
18.74 lb. 20.73 lb.
-88 dB/-91 dB A-weighted
-84 dB/-86 dB A-weighted
MICROPHONE INPUTS
XLR, electronically balanced input circuit
110 dB / 114 dB A-weighted (0 dBu In @ +10 dB gain)
+12 dBu @ +10 dB gain
approx. 2.2 kΩ balanced / 1.1 kΩ unbalanced
Frequency response
IEC standard receptacle
DIMENSIONS/WEIGHT
-112 dB / 114 dB A-weighted
-112 dB / 114 dB A-weighted
-112 dB / 114 dB A-weighted
< 10 Hz - > 200 kHz (-3 dB)
< 10 Hz - 200 kHz (-1 dB)
MAIN MIX SYSTEM DATA
-102 dB/-106 dB A-weighted
+30 dB, +10 dB with pad
approx. 20 kΩ, balanced
+21 dBu
MONO LINE INPUTS
0.001% / 0.0007% A-weighted
1/4" TS connectors, balanced
12 kHz / +/-15 dB
STEREO LINE INPUTS
EQUALIZER
+21 dBu
2 TRACK INPUT
80 Hz / +/-15 dB
2.5 kHz / +/-15 dB
STEREO OUTPUTS
RCA
approx. 10 kΩ
PREAMP OUTPUTS
1/4" TS connectors, unbalanced
approx. 150 Ω, unbalanced
1/4" TS connectors, unbalanced
approx. 150 Ω, unbalanced
+21 dBu
100 - 240 V~, 50 / 60 Hz
4 - 8 Ω
Output power
AMPLIFIER
POWER SUPPLY
approx. 1.5 msecs
90 dB
4 - 8 Ω
LOUDSPEAKER OUTPUTS
DSP
DISPLAY
NEUTRIK ® SPEAKON ® -compatible
46.875 kHz
max. 5 secs
24-bit Delta-Sigma, 64/128-times oversampling
8 - 16 Ω
Dimensions (H x W x D)
approx. 12 2/5" x 18 1/10" x 8 3/5"
Weight
approx. 315 mm x 460 mm x 220 mm