Behringer PMH660M/PMH880S - Manual (Page 11)

11
EUROPOWER PMH660M/PMH880S
This illustration shows just one example of how the channels
of your power mixer can be used, including the connection of
mono and stereo sources, and the tape ins and outs recording
the mix signal or playing back external signals.
Fig. 5.3: Standard set-up (example)
5. WIRING EXAMPLES
One example of how to use your power mixer with a
subwoofer in bridged mono mode. The illustration shows the
PMH880S with a subwoofer connected to OUTPUT B that will
receive the full (bridged) output power. A separate stereo power
amp (BEHRINGER EUROPOWER EP1500) for the stereo main P.A.
signal is connected to the PRE AMP MAIN outputs. The PRE AMP
MONITOR output is wired to active speakers on the stage. This
application can also be realized with the PMH660M, except for
the main P.A. signal, which would be mono.
Fig. 5.4: EUROPOWER in bridged mono mode