Bloomfield 2030 - Manual (Page 9)

OPERATION (continued)
WARNING:
Burn Hazard.
This appliance
dispenses very hot liquid.
Serious bodily injury from
scalding can occur from
contact with dispensed
liquids.
CAUTION:
Burn Hazard
To avoid splashing or
overflowing hot liquids,
ALWAYS use an empty
dispenser before starting
the brew cycle. Failure to
comply can cause serious
burns.
CAUTION:
Burn Hazard
After a brew cycle, brew
chamber contents are
HOT. Remove the brew
chamber and dispose of
used filter and tea leaves
with care. Failure to
comply can cause serious
burns.
CAUTION:
Burn Hazard
Exposed surfaces of the
appliance, as well as brew
chamber may be HOT to
the touch, and can cause
serious burns. 1. Remove the brew chamber from
under the spray head. Place one (1)
genuine Bloomfield paper filter into
the brew chamber. Add your choice
of pre-measured tea leaves.
Shake the brew chamber gently to
level the tea leaves.
Slide the brew chamber back into
place.
2.
Place an empty dispenser under the
brew chamber.
3.
If any volume other than “Standard”
brew volume is required, press the
appropriate volume key.
4. To begin the brew cycle, press BREW
key. Hot water will start spraying over
the tea leaves, and brewed tea will start
filling the server. Cold water will flow from
the dilution nozzle to bring the tea to the
proper concentration. When the tea stops
flowing from the brew chamber, the fresh
tea is ready to serve.
NOTE: Brewing will not begin until the
Precise Temperature for Brewing™ has
been reached. (See page 6)
5. At the end of the brew cycle, the view screen
will read “Brew complete”. After all dripping
has stopped, remove the brew chamber
from the brewer. Discard the used paper
filter and tea leaves.
6.
The brewer is now be ready to begin
another brewing cycle.
USER’S GUIDE
PAPER
FILTER
BREW
CHAMBER
Brew complete
7