Bloomfield 2030 - Manual (Page 13)

CLEANING INSTRUCTIONS
PROCEDURE: Clean Coffee Brewer
PRECAUTIONS: Disconnect brewer from electric power.
Allow brewer to cool.
FREQUENCY: Daily
TOOLS: Mild Detergent, Clean Soft Cloth or Sponge
Bristle Brush
1. Disconnect brewer from electric power.
Allow brewer to cool before cleaning.
2. Remove dispenser.
3. Remove and empty brew chamber.
4. Remove the spray disk from the brew head:
Press up on the spray disk ears, then turn the disk to the
left to unlatch. Remove the gasket from inside the brew
head.
5. Wipe inside of brew head and area around the brew head
with a soft clean cloth or sponge moistened with clean
water.
6. Wash the spray disk in a sink using warm water and a mild
detergent. A bristle brush may be used to clear clogged
spray holes. Rinse the spray disk with clean water and
allow to air dry.
7. Wash the brew chamber in a sink using warm water and a
mild detergent. A bristle brush may be used to clean the
inside. Rinse with clean water and allow to air dry.
8. Reinstall the gasket INSIDE the brew head, then reinstall
the spray disk.
9. Reinstall the brew chamber.
10. Dispensers may be washed in a dishwasher, or in a sink
with warm water and mild detergent. Rinse thoroughly and
dry with a soft cloth.
Procedure is complete
CAUTION:
Burn Hazard
Brewing and serving
temperatures of coffee are
extremely hot.
Hot coffee will cause
serious skin burns.
CAUTION:
Electric Shock
Hazard
Do not submerge or immerse
brewer in water. Do not pour or
splash water into or over air
vents, control panel or warmer
plates.
IMPORTANT:
DO NOT use steel wool, sharp
objects, or caustic, abrasive or
chlorinated cleansers to clean
the brewer or dispensers
11