Liebherr LR 1300 - Manual (Page 2)

2 LR 1300 sx ANSI/ANSE B 30.5
Dimensions
Basic machine with undercarriage
9´10´´
22´9´´
57.7´´
15.7´´
47.2´´
26´3´´
11´10´´
7´5´´
16´5´´
5´3´´
6´2´´ 31´8´´
27´11´´
14´ 5´7´´
R 32´
34´
28´1´´
66´10´´
26´3´´
R 22´11´´
58.5´´
15.7´´ 59´´
27´3´´
Operating weight
The operating weight includes the basic machine with crawlers,
2 main winches 33,725 lbf and 66 ft main boom, consisting of
A-frame, boom foot (33 ft), boom head (23 ft), boom extension
(10 ft), 273,400 lbs basic counterweight, 125,700 lbs carbody
conterweight and 661,400 lbs hook block.
Total weight approx. 639,400 lbs
Ground pressure
Ground bearing pressure 20.6 PSI
Equipment
Main boom (No. 2821.xx) max. length 302 ft
Luffing jib (No. 2316.xx) max. length 371 ft
Max. combination main boom 184 ft and luffing jib 371 ft
Fixed jib (No. 0906.xx) 23 ft
Fixed jib (No. 1507.xx) 26.2 ft
Auxiliary jib 79,400 lbs
Remarks
1. The lifting capacities stated are valid for lifting operation only
(corresponding with crane classification according to F.E.M.
1.001. crane group A1).
2. Crane standing on firm, horizontal ground.
3. The weight of the lifting device (hoisting ropes, hook block,
shackle etc.) must be deducted form the gross lifting capacity to
obtain a net lifting value.
4. Additional equipment on boom (e.g. boom walkways, auxiliary jib)
must be deducted to get the net lifting capacity.
5. For max. wind speed please refer to lift chart in operator‘s cab
or manual.
6. Working radii are measured from center of swing and under load.
7. The lifting capacities are valid for 360 degrees of swing.
8. Calculation of stability under load is based on ANSI/ASME B 30.5
load ratings as well as ISO 4305 Table 2 and is tested according
to SAE J765.
9. Loads for calculation of structures are corresponding to F.E.M.
1.001-1998 and are tested according to SAE J987.