Binatone 2300 - Manual (Page 30)

Binatone Help Line : 0845 345 9677 28
Some functions (including handset registration) require a PIN code. The default PIN is 0000
but you are able to change to your personal
4-digit PIN.
Press the MENU/OK button.
Then scroll DOWN until you see “SETTINGS”.
Then press the MENU/OK button.
Then scroll DOWN until you see “MODIFY PIN”.
Press the MENU/OK button and the display will show
“ PIN ?”.
Enter the PIN code using the keypad (if you haven’t changed it, the
default PIN is 0000).
Press the MENU/OK button and the display will show
“NEW PIN”.
Use the keypad to enter the new PIN (4 digits from 0-9).
Press the MENU/OK button to confirm and the display will show
“ REPEAT”.
Use the keypad to enter the new PIN again and
press the
MENU/OK button to confirm.
Press the PHONE BOOK/BACK until you return to idle mode.
* If you enter the wrong PIN at any time you will hear an error tone and the display will return
to the previous menu.
To Change the PIN code
You will hear the confirmation beeps and the display will return to "MODIFY PIN".