Binatone 2300 User Manual

Page 26

Binatone Help Line : 0845 345 9677

the new handset

up a three-way conference

7. At the same time, on the base, press the MENU/OK button to see

"PHONEBOOK"

8. Press the

UP button tweice to see "REGISTRATION"

4. Press the

DOWN button to select a base number (BASE 1, 2,3 or 4)

5. Press the

MENU/OK button to see "PIN ?"

Key in the 4 digit PIN code for the base - the CC2300 default PIN code is 0000

6. Press the

MENU/OK button to confirm, and the display will flash

"SEARCHING 1" (or 2,3,4)

9. Press the

MENU/OK button to see "SEARCHING" flash on base display

After a short delay, if the registration is successful, there will be a

confirmation beep, and the Handset display will go back to idle mode with

number shown (e.g. HS1, HS2). The base display will also go back to

To de-register a handset

using the CC2300 base menu

With the base in idle mode:

1. Press

the

MENU/OK button to see "PHONEBOOK"

2 .

Press the

DOWN button twice to see "SETTINGS"

Press the

MENU/OK button to see "DELETE HS"

Press the

MENU/OK button to see " HS 1 " (or 2,3, 4)

Press the

MENU/OK button to confirm, and the selected handset will be

Press the

PHONEBOOK/BACK

button to return to the previous menu

will show "UNREGISTERED".)

To de-register a handset

You may need to do this if you need to replace a faulty handset. Call

the Binatone help

line if you need more advice.

at any time.

de-registered. (The display on the handset that has been deleted

Press

UP or DOWN button to select the handset you want to de-register.

Note:

Handsets can also be de-registered using another cordless handset,

as described in the cordless handset user guide.

idle mode.