Belkin F5D7234-4 - Manual (Page 34)

32
Wireless G Router
sections
table of contents 1 2 3 4 6 7 8 9 10 5
alTeRnaTe seTUP MeTHod
setting your Internet service Provider (IsP) Connection Type to
dynamic IP
A dynamic connection type is the most common connection type used
with cable modems. Setting the connection type to “dynamic” in many
cases is enough to complete the connection to your ISP. Some dynamic
connection types may require a host name. You can enter your host
name in the space provided if you were assigned one. Your host name
is assigned by your ISP. Some dynamic connections may require that
you clone the MAC address of the PC that was originally connected to
the modem.
Change Wan MaC address
If your ISP requires a specific MAC address to connect to the service,
you can enter a specific MAC address or clone the current computer’s
MAC address through this link.