beautypg.com

Step 6 – Blue Rhino GWU501E User Manual

Page 8

background image

Replacing Pilot and Control Valve Series GWU501E, GWU511A, GWU512A LP Gas 606030

8

For assistance call 1.800.762.1142.

Step 6

Remove the emitter screen:

GWU501E/GWU511A: there are 4 phillips head screws that hold the emitter screen (the section that gets hot) to the emitter bottom.
Remove these screws then remove the emitter screen. Set aside for later reinstallation.

GWU512A: there are 3 small bolts holding the emitter screen (steel cone) to the emitter bottom. Using the #9 mm open wrench,
remove these bolts. Then remove the emitter screen. [Not pictured]

(1 shown)

See also other documents in the category Blue Rhino Gardening equipment: