Philips AVENT Écoute-bébé DECT - Manual (Page 19)

19
7.8 Cry alert
You can set a cry alert to warn you that the
baby is crying.
1
Select ‘Cry alert’ in the menu with the + and -
buttons and press OK to confirm.
2
Select ‘Vibration ON’ with the + and -
buttons. Press OK to confirm.
• The cry alert indicator appears on the
display.
• The cry alert goes off when the sound in
the baby room is loud enough to make the
fourth sound level light go on. The parent
unit vibrates and the message ‘Cry alert’
appears on the display for 4 seconds. The
cry alert repeats every 8 seconds until the
sound becomes less loud or you deactivate
the cry alert.
3
To deactivate the cry alert, select ‘Cry alert’ in
the menu and select ‘Vibration OFF’ with the
+ and - buttons.
only, sound and vibration, vibration only and
display only. Press OK to confirm.
• After you have confirmed your choice of the
alert option, the temperature alert symbol
appears on the display.
7
Select ‘Temp Scale’ with the + and - buttons.
Press OK to confirm and to start setting the
temperature scale.
8
Select ‘Celsius’ or ‘Fahrenheit’ and press OK to
confirm.
• The temperature in the set scale appears
on the display. If the temperature is within
the set range, the temperature alert symbol
has two segments.
• If the temperature is below the set range,
the temperature alert symbol on the
display has only one segment and flashes.
The message ‘TOO COLD’ appears on the
display.
• If the temperature is above the set range,
the temperature alert symbol on the
display has three segments and flashes. The
message ‘TOO HOT’ appears on the display.
EN
g
LIS
h