Philips AVENT Écoute-bébé DECT - Manual (Page 10)

10
6 Functions and
feedback on the
parent unit
6.1 Volume
The volume can be set if the menu is not active.
There are seven volume levels and a ‘volume off’
setting.
6.1.1 Setting the volume level
1
Press the + button or the - button once.
• The current volume level appears on the
display.
2
Press the + button to increase the volume
or press the - button to decrease the volume.
• The parent unit beeps at every volume step
• At maximum volume, the parent unit gives
two beeps.
• If no button is pressed for more than
2 seconds, the volume level indication
disappears and the volume setting is saved.
6.1.2 Volume off
Below the lowest volume setting, there is a
‘volume off’ setting.
1
Press the + button or the - button once.
• The current volume level appears on the
display.
2
Press and hold the - button for more than
2 seconds to set the volume to off.
• The message ‘MUTE’ and the mute symbol
appear on the display.
5.4 Battery status light
1
The battery status light is solid green when
the baby unit runs on battery power and
the batteries contain enough energy.
2
The battery status light flashes red quickly
when the batteries run low while the baby
unit is running on battery power.
• Replace the batteries when they run low.
• If the batteries run out of power while the
baby unit is running on battery power, the
baby unit switches off and the parent unit
loses connection with the baby unit.
D Note:
We advise you to use the baby unit on mains
power, as the baby unit has a limited operating
time when you use it on non-rechargeable alkaline
batteries. The operating time on non-rechargeable
batteries is 24 hours.