Philips AVENT Écoute-bébé DECT - Manual (Page 16)

16
7.3.2 Activating Eco Max mode
1
Select ‘Eco Max’ in the menu with the + and -
buttons and press OK to confirm.
2
When the display shows ‘Turn On’, press OK
to switch on the Eco Max mode.
3
The warning message ‘!No alert if out of
range, OK?’ appears on the display. Press OK
to confirm.
D Note:
The warning message scrolls across the display
twice. If you do not press OK, the parent
unit leaves the menu and the Eco Max mode
remains off.
• The Eco Max indication flashes on the
display and the ‘link’ light flashes green slowly.
• When the parent unit receives a DECT
signal from the baby unit because the baby
makes a sound, the ‘link’ light turns solid
green again.
7.3.3 Deactivating Eco Max mode
1
Press the MENU button
2
Use the + and - buttons to select ‘Eco Max’
and press OK to confirm.
3
Use the + and - buttons to select ‘Turn Off’
and press OK to confirm.
7.4 Nightlight
This option in the parent unit menu allows you to
switch the nightlight on the baby unit on and off.
1
Select ‘Nightlight’ in the menu with the + and
- buttons and press OK to confirm.
2
Use the + and - buttons to choose ‘Turn On’.
• The nightlight symbol Q appears on the display.
7.3 Eco Max mode
This baby monitor has a built-in Smart Eco mode
that automatically reduces the DECT signal from
the baby unit as the distance between parent unit
and baby unit becomes shorter. By reducing radio
transmission, it helps to save energy.
If you want to save even more energy and to stop
radio transmission, activate the Eco Max mode
in the menu of the parent unit. In this mode, the
DECT signal of the baby unit is switched off. As
soon as the baby makes a sound, the DECT signal
of the baby unit automatically switches on again.
C Caution:
In Eco Max mode, the parent unit receives
feedback from the baby unit with a delay. When
your baby makes a sound, the baby unit first has
to reactivate radio transmission before it can
send feedback to the parent unit.
7.3.1 Please note the following:
• Before you select Eco Max mode, make sure
that the parent unit and baby unit are within
operating range, see section ‘Operating range’
in chapter ‘Using the baby monitor’. In Eco
Max mode you do not receive feedback when
the parent unit is out of range of the baby
unit. You can check the link by pressing any
button on the parent unit.
• If there is no radio transmission from the baby
unit to the parent unit in Eco Max mode, the
sound level lights on the parent unit are off.
The sound level lights go on when the baby
unit reactivates radio transmission because
the baby makes a sound above the selected
sensitivity level.
• If you want to operate the baby monitor in
Eco Max mode, make sure that the sensitivity
level is set between 1 and 3. If the sensitivity
level is set to level 4, the baby unit does not
switch off radio transmission in Eco Max
mode.