Bush Hog 225 - Manual (Page 56)

MAINTENANCE
225 Series 09/10 Maintenance Section 5-2
© 2010 Alamo Group Inc.
MAINTENANCE
Lubrication
The Bush Hog 225 Series is a rugged, dependable
Blade that should perform satisfactorily with the
following preventive maintenance:
Lubricate the Moldboard Pivot Pin, the Moldboard
Tilt Pin, and Mainframe Swing Pin on the A-Frame
after every 10 hours of operation. Decals are placed
in locations about the implement indicating locations
of Grease Fittings.
Replace excessively worn Grader Blade when
ditching. A badly worn cutting edge increases the
strain on the Blade and the Tractor and reduces
efficiency.
If the Gauge Wheel is used, a Grease Fitting is
provided at the Caster Pivot location and on Wheel
Hub.