BT 1800 - Manual (Page 45)

45
Enter a name for the base to be
displayed on your computer.
Enter the system code for the base.
(Default setting = 0000)
At the base:
Press and hold the
ᮤ Skip button
until the Play button starts to flash.
At your computer:
Click OK to confirm.
Display shows the Searching message
box.
After a short while the display shows
a confirmation message box and the
BT On-Air USB unit is registered.
This can take up to 2 minutes.
Display then shows:
Click OK to return to main Monitor
screen.
If you want to use your BT On-Air
USB unit with another base, you will
first need to register it on that base.
At your computer:
Click the BT On-Air icon in the
system tray to open the Monitor.
Click Register.
Using a BT On-Air USB unit
with more than one base
Your BT On-Air USB unit can be registered on
up to four bases. With a laptop computer this
allows you to connect to the Internet without
wires at up to four geographically separate
locations.
Your BT On-Air USB unit supplied is
pre-registered (as Nb 6) to its base (as Base 1).
➜
➜
➜
➜
➜
➜
ᮤ Ski p
Important
The BT On-Air USB unit can only be
registered to a BT On-Air 1800 base. Other
base stations in the BT On-Air range are
not compatible with the USB unit. See web
site www.bt.com/on-air for latest
compatibility information.
1
1
2
3
1
To register a BT On-Air USB unit
to a base