BT 1800 - Manual (Page 27)

27
Press the UP or DOWN button. The
display will show MEM --.
Use the DOWN button to scroll to
the required memory number and
press OK.
Or
Enter the number of the memory
location and press OK.
▲
▼
C OK
C OK
1 2 3
Press and hold the Skip ᮣ button on
the base until the handset starts to
ring. All handsets registered with the
base will ring.
To end paging, press and hold the
Skip
ᮣ
button again.
You can alert handset users that they are
wanted, or locate a missing handset. (Paging
calls cannot be answered by a handset.)
Skip ᮣ
Skip ᮣ
Paging handsets
If you have multiple handsets registered to a
base you can make internal calls between
handsets.
You can make an internal call while using the
BT On-Air USB unit to connect to the Internet.
Internal calls
▼ Note
If you dial the number for the BT On-Air
USB unit, you hear an engaged tone.
Press the UP or DOWN button to
display the number you wish to dial.
Press the GREEN PHONE button to
dial the number.
Or
Quickdial:
Enter the number of the memory
location you wish to dial and press
#
(e.g. Press 1 then # from idle to dial
the phone number stored in memory
location 1).
1 2 3
▲
▼
To dial a number from the memory
To edit and delete memory numbers
To page a handset from the base
Press and hold the 0 button until a /
appears on the point where you want
to enter a pause. The / indicates a
pause, therefore, when you dial the
number stored, your On-Air 1800 will
automatically insert the pause where
it was stored.
To insert a pause when storing
a number in the memory
0
Press the C button to clear and back
space the numbers. Edit entries by
using the numbers on the keypad.
Press OK to confirm.
Press the C button to return to idle.
C OK
C OK
C OK
1 2 3