Black & Decker BLC18750DMS User Manual

Page 5

USING THE TIMER (J)

1. Press

buttons to select speed that best

suits your desired task. digital display will show

number of speed selected.

2. Press and release Mode button to select TIMeR. The

red light will be illuminated above TIMeR indicator.

digital display will show 00.

3. Press

buttons and timer will change in 5

second increments up to a maximum of 60 seconds.

4. Press START/SToP button and blender will begin running. display will show

countdown in 1-second increments and blender will automatically stop once

time has run down.

5. If longer blending is required, simply press

buttons to select

additional time desired. Then START/SToP button again.

Note: To run blender longer than 60 seconds or if mixture needs more blending

once blender has stopped, press

button to select additional time desired and

press START/SToP button to resume blending.
Important: If SPEED is selected first and then TIME is selected, visual display

will show the time countdown as blender runs. Otherwise, countdown will not

be shown.
USING PULSE (K)
Use this function for blending thick mixtures, such as smoothies, power drinks

and milkshakes.
1. Press

buttons to select the speed that best suits your task. digital

display will show the number of the speed selected.

2. Press and release Mode button to select PUlSe.

The red indicator light will be illuminated above

PUlSe.

3. Press and hold START/SToP button for no more than

5 seconds. Release and press again until food has

desired consistency. Releasing START/SToP button

automatically turns blender off.

4. Allow several seconds between pulses.

Note: Use PUlSe button to begin blending process when preparing beverages

that include ice cubes; this helps to produce smoother texture.
5. once the mixture is ready for continuous blending, you may use the speed

buttons or press and release the Mode button to select TIMeR. Press

buttons to select your speed or the desired amount of running time.

6. Press START/SToP button and blender will begin running. display will show

countdown in 1-second increments and blender will automatically stop when

time has run down.

USING CRUSH (L)
Use to crush up to 1½ cups ice cubes to a fine crush in just 10 seconds.

1. Press and release Mode button to select CRUSH.

The red indicator light will be illuminated below

CRUSH.

2. Press START/SToP button. Two ice cubes will

flash on digital display while blender is running

on this function.

3. Blender will continue to run until START/SToP

button is pressed again.

ADDING FOODS WHILE BLENDER IS RUNNING

open lid cap to add ingredients while blender is

running. drop or pour ingredients through opening.

(M)
Important: Do not remove lid while blender is

running.

BLENDING TIPS AND TECHNIQUES
• Cut food into pieces no larger than ¾-inch for use in blender.
• When preparing foods that have several different kinds of ingredients,

always add liquid ingredients first.

• When ingredients splatter onto sides of jar or mixture is very thick, press

START/SToP button to turn appliance off. Remove lid and use a rubber

spatula to scrape down sides of the jar and to redistribute food, pushing

food toward blades. Replace lid and continue blending.

Important: Appliance should always have cover in place when in use.
Caution: Do not place blender jar on base when motor is running.

• lid cap holds up to 2 oz. of liquid and can be used

as a measure when adding ingredients such as

juices, milk, cream and liquor (N).

• When making bread crumbs, chopping nuts or

grinding coffee beans, make sure blender jar is

completely dry.

• When using PUlSe function, use short bursts.

Allow blades to stop rotating between pulses.

do not use pulse for more than 2 minutes.

• Use PUlSe function to begin blending process when preparing beverages

that include ice cubes; this helps to produce a smoother texture. once

mixture begins to come together:

o Set Mode to SPeed; select desired speed.

o Change Mode to TIMeR; select desired running time.

o Press START/SToP and let blender run.

CUPS

OZS

CUPS

OZS

ENGLISH