Britax FRONTIER 85 SICT - Manual (Page 22)

40 41
Booster Mode
WARNING!
• Only use a lap-shoulder belt to secure the child in booster
mode.
• Use the shoulder belt guides on the child seat to ensure
proper fit.
• Ensure the lap part of the belt sits low across the child’s hips
and that the shoulder part does not contact the child’s neck.
Before you begin:
• Ensure that the positioning block is in booster position.
• If your vehicle seat back is adjustable, ensure it is in the
upright position before placing the child seat on the vehicle
seat.
1 Place the child seat on the vehicle seat and have the child sit in
the child seat.
2 Adjust the head restraint so
the shoulder belt guides
position the vehicle belt at
or just above the child’s
shoulders. The child’s ears
should be below the top of the
head restraint.
4 Fasten the vehicle belt across
the child.
* Lap part of the vehicle belt
must be routed low across the
child’s upper thighs.
3 Pull the vehicle belt out and
route the shoulder part of the
vehicle belt through the upper
belt guide.
Checklist
Before traveling, verify that the:
9 Vehicle belt is not twisted.
9 Buckle does not rest on red belt guide.
9 Shoulder part of vehicle belt is routed through upper belt guide at or
above the child’s shoulder, lies across the center of the child’s chest
and does not contact the child’s neck.
9 Lap part of the vehicle belt is routed low across the child’s upper
thighs.
5 Remove slack from the vehicle
belt.
Securing Your Child Securing Your Child