Britax FRONTIER 85 SICT User Manual

Page 10

Insert one tongue at a time into

the buckle.
NOTE: Proper connection is

confirmed with an audible click

after inserting each buckle

tongue.

Fastening the Buckle

Releasing the Buckle

Press the release button and

pull the tongues from the

buckle.
NOTE: Periodically clean

the buckle to ensure proper

operation. See Page 46.

Using the Chest Clip

Squeeze to

open

Push together to fasten

NOTE: Always position the chest clip at

armpit level.

Using the Positioning Block

NOTE: Set the positioning block position

BEFORE installing.

Unhook the Versa-Tether from

the storage clip

Harness Position

Booster Position

Positioning

Block

Positioning

Block

Using Lower Anchors and Tethers for Children (LATCH)

LATCH SYSTEM ANCHOR LOCATIONS

Tether

Anchor

Lower LATCH

Anchors

The figure above shows typical locations for lower anchors and

tether anchors in a vehicle. Check your vehicle owner’s manual

for the exact LATCH anchor locations and seating positions

(if equipped), information on use with a child seat, and for the

maximum weight rating for the LATCH anchors.
Standard vehicle seat spacing between LATCH anchors is 11 inches

(27.9 cm). This child seat can be used in a seating position with up

to 20 inches (50.8 cm) of space between the LATCH anchors if the

vehicle manufacturer allows.

Child Seat Functions