Buffalo Technology WLI-TX4-G54HP - Manual (Page 24)

4
Troubleshooting
Initializing the Ethernet Converter returns it to default settings. This might be useful
if you cannot access configuration settings, have lost the password to the Ethernet
Converter, or desire to return the settings to the default factory settings.
To initialize the device, simply hold in the black INIT button on the side of the Ethernet
Converter for 5 seconds or until the DIAG light glows red. Allow a minute for the
initialization to complete. Afterwards, refer to the Quick Setup Guide or the beginning of
this User Manual to reconfigure the Ethernet Converter.
INIT button