4 release the scanner lock, 5 install the power cord, Release the scanner lock install the power cord – Brother DCP-9045CDN User Manual
Page 9: Setting up the machine, 4release the scanner lock, 5install the power cord
Setting Up the Machine
7
4
Release the Scanner Lock
1
Push the lever (1) in the direction shown to
unlock the scanner.
(The gray scanner lock lever is located at the
back left side, under the document cover (2).)
5
Install the power cord
1
Make sure that the machine’s power switch is
off. Remove the label covering the AC power
inlet.
2
Connect the AC power cord to the machine.
3
Plug the AC power cord into an AC outlet. Turn
the power switch on.
(1)
(2)