Brother DCP-9045CDN - Manual (Page 8)

Setting Up the Machine
6
STEP 1
3 Load paper in the paper tray
1
Pull the paper tray completely out of the
machine.
2
While pressing the green paper-guide release
lever (1), slide the paper guides to fit the paper
size. Make sure that the guides are firmly in the
slots.
3
Fan the stack of paper well to avoid paper jams
and misfeeds.
4
Put paper in the paper tray. Make sure that the
paper is flat in the tray and below the maximum
paper mark.
5
Put the paper tray firmly back into the machine.
(1)