Brother 885-X16 - Manual (Page 21)

20
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
1
1 Needle holder
2 Needle threader lever
3 Guide
5
Pull down the needle threader lever as
much as possible, and then turn the lever
toward the back of the machine (away
from you). Make sure that the hook passes
through the eye of the needle and grabs
the thread.
1 Hook
2 Thread
• Hold the thread in front of the needle to
make sure that the hook grabs it.
6
While lightly holding the thread, turn the
needle threader lever toward the front of
the machine (toward you). The hook will
pull the thread through the needle.
7
Raise the needle threader lever.
8
Pull the loop of the thread passed through
the eye of the needle toward the rear of
the machine.
1 Loop of thread
CAUTION
9
Raise the presser foot lever.
1
2
3
1 2 1
● Be careful not to pull on the thread with
force or it may bend the needle.
● If the thread does not pass through the
eye of the needle, start from step
3
again.
1