Configuring a wds bridge – Buffalo Technology WHR-G54S User Manual

Page 70

The Web-Based Configuration Utility for your first

AirStation will open. Click on the Advanced tab.

On the left side menu, click on Wireless Config, and then

Basic.

Change the Wireless Channel from Auto to a channel.

Make a note of the channel that you’ve chosen, because all

of your wireless devices will need to be configured to use

this same channel. Change Framebursting from 125 High

Speed Mode to Framebursting or Do not use (Framebursting

is recommended if all your client devices support it). Click

Apply. Your AirStation will reboot in 30-60 seconds.

Optional: Note the SSID of this AirStation. By default,

this value will be different for each AirStation. For easy

roaming, you may want to change the SSIDs of both

AirStations to a constant value.

Configuring a WDS Bridge