Buffalo Technology Buffalo AirStation G54 WLA-G54C - Manual (Page 13)

12
Installation / Setup
4.3.6 Log Information
Display log info level - Select
Error and/or Notify
to specify the types of reports to be logged by the
AirStation.
Display log info - Select the specifi c reports to
be logged.
Log information - Displays recorded logs.
4.3.7 Syslog transmitting
Select
Use or Do not use
• Syslog Server - Enter the IP address of the
Syslog server.
• Log Information Level - Select
Error and/or Notify to specify the types of
reports to be sent to the Syslog server.
• Log Information - Select the specifi c reports
to be sent to the Syslog server.
4.3.8 Save/Restore
Save current settings - Click Save to
open the fi le saving dialog and save current
AirStation settings to a fi le.
Restored saved settings - Restores
settings from a fi le that has been saved. Click
Choose fi le to select the saved fi le and click
Restore.
■ Note: If the setting fi le is saved by a newer fi rmware than the current one, the AirStation can’t
restore the settings.
4.3.9 Initialization/Reboot
Click
Restart to reboot AirStation
Click Restore to reset the AirStation to
default factory settings.
■ Note: Resetting to default factory settings
will erase all settings and passwords previously
entered.
Fig ure 4.3.7
Log Information
Fig ure 4.3.7
Syslog
Transmitting
Fig ure 4.3.8
Save / Restore
Fig ure 4.3.9
Initialization /
Reboot